Selection of Cold-proof Gloves and Precautions

We often see some workers, masters will wear protective gloves when working, there are many kinds of protective gloves, in addition to anti-chemical species, there are cold gloves, heat radiation, fire retardant and other functions, it needs to be noted that the general anti-acid and alkali gloves and anti-chemical protective gloves are not the same, because many chemicals relative to the glove material has different permeation capabilities, so when necessary, you should choose protective gloves with anti-penetration of various types of chemicals. The role of gloves is mainly to protect the hands from injury when working in some workplaces with large hand injuries, for example, when working in factories, kitchens, and chemical storage places, if the hands do not take protective measures, they are prone to cuts and stabs, burns, frostbites, contacts, chemical injuries, skin infections, etc. These injuries can be avoided by wearing protective gloves, so you must wear protective gloves when working with both hands.    

So what are the classifications of protective gloves? Common protective gloves are straight gloves, working gloves, anti-radiation gloves, insulating gloves, anti-static gloves, etc., protective gloves to choose the right size of gloves. The size of the gloves should be appropriate, if the gloves are too tight, restricting blood flow, easy to cause fatigue, and uncomfortable; If it is too loose, it is not flexible to use and it is easy to fall off.

Precautions for the use of cold-proof gloves

1, cold-proof gloves Natural rubber gloves should not be in contact with acids, alkalis and oils for a long time when used, and sharp objects should be prevented from puncture. After use, wash and dry, sprinkle talcum powder on the inside and outside of the gloves, and keep it properly, and do not be pressed or heated in the storage.    

2, cold-proof gloves all rubber, latex, synthetic rubber gloves color must be uniform, gloves in addition to the palm of the hand requirements are thick, other parts of the thin thickness should be similar, the surface should be smooth (for anti-slip in the palm face made of stripes or granular anti-slip pattern except) or palm face is not allowed to have more than 1. 5mm of air bubbles are present, allowing for slight wrinkles but no cracks.    

3, In addition to the selection of cold-proof gloves and insulation gloves according to regulations, the voltage strength should be retested after a one-year use period, and those who are unqualified should no longer be used as insulated gloves.    

4, cold gloves to choose the right size of gloves. The size of the gloves should be appropriate, if the gloves are too tight, restricting blood flow, easy to cause fatigue, and uncomfortable; If it is too loose, it is not flexible to use and it is easy to fall off.    

5, cold gloves insulation protective gloves, before each use must be carefully checked visually, and blow gas into the gloves by blowing gas, in the cuffs of the gloves by hand pinch to prevent air leakage, observe whether the gloves will leak by themselves. If the gloves are checked for air leakage, they can be used as hygienic gloves. It can still be used if the insulation gloves are slightly damaged, but a pair of leather or yarn gloves should be covered with the insulation gloves to ensure safety.